Genuine Dell Replacement Fan, Dimension 2350, Temperature Control, CPU Cooling Fan, 92mm x 25mm with Standard 3-pin connector for 2X333, 02X322 and 5U035.
The Dell Dimension 2350 Desktop Computer came with the JMC 0925-12HBTA-2 Cooling Fan as Original Equipment on some 2300 machines. This fan (shroud is not included) will fit in the shroud and plug directly into the motherboard; Dell part number 2X333, 02X322 and 5U035.
This JMC Original Equipment Replacement fan is a 92mm x 25mm, 12 Volt, Temperature Control fan with the Heat Sensor is made to work in your Dell Dimension 2350 computer and is a Direct replacement for the 0925-12HBTA-2. The fan comes with a Standard 3-pin connector and a 14" wire leads that allows you to easily reach and plug into the system board.
NOTE: Please check your fan application and verify plug configuration before making your purchase. Dell computers vary by year even if they are the same model and may use a different 3-pin motherboard connector.
If your 3-pin connector is different from the one shown in the photo, then this fan will not fit your application. You will require the Dell 3-pin connector and not the Standard 3-pin connector. See specifications and photos for comparison. The Dell 3-pin fan is available for sale on the site. Type into the sites search box: Dell Dimension 2350 CPU Case Cooling Fan 92x25mm Dell 3-pin connector, to bring up the listing.
Reminders, if applicable to your model, avoid the inconvenience of down time, by checking the Rubber Insulator Mounts before making your fan purchase. They are not included with the fan and do not always need replacement. Rubber Insulator Mounts are optional and available for sale on the site. Bring up the listing by typing Rubber Insulator Mounts into the site's search Box.
Restore your computer to its Original condition with this High Quality fan from Genuine Dell Fans.
Genuine Dell Replacement Fan, Dimension 2350, Temperature Control, CPU Case Cooling Fan, 92mm x 25mm with Standard 3-pin connector for 2X333, 02X322 and 5U035 in stock.
Specifications:
. Condition: New
. Mfr: JMC
. Size: 92mm x 92mm x 25mm
. Type: Temperature Control with Heat Sensor
. Voltage: DC 12V
. Rated Current: 0.70A
. Speed: 1500-3500 RPM
. Air Flow: 30~66 CFM
. Noise Level: 46.0 dBA
. Bearing: Dual Ball
. Wire Length: 14"
. Connector: Standard 3-pin
